CZ P-10 F OR SR is a full-size pistol with a polymer frame, featuring a slide prepared for mounting a red dot sight and an extended barrel equipped with a 1/2″×28 UNEF–3A thread.
CZ P-10 F OR SR is a full-size pistol with a polymer frame, featuring a slide prepared for mounting a red dot sight and an extended barrel equipped with a 1/2″×28 UNEF–3A thread. The pre-cocked striker mechanism, 19-round magazine, raised sights with luminescent dots, and a weight of 830 grams make it a versatile choice for the shooting range and sport shooting. Suitable for use For regular training at the shooting range For dynamic sport shooting For shooting with a red dot sight For users who prefer a full-size service pistol For shooters who require a threaded barrel For those who prefer increased magazine capacity For users with different hand sizes For both right- and left-handed shooters Why choose the CZ P-10 F OR SR? Factory interface for mounting a red dot sight CZ OR mounting system with interchangeable adapter plates Extended 134 mm cold hammer-forged barrel Threaded muzzle 1/2″×28 UNEF–3A Protective cap for the muzzle thread Raised iron sights with luminescent dots Smooth pre-cocked striker mechanism Trigger pull weight 25 ± 4 N Short trigger reset travel — 4 mm Standard 19-round magazine Option to increase capacity to 21 rounds with an extended magazine Lightweight and durable polymer frame reinforced with fiberglass Interchangeable backstraps in sizes S, M, and L Ambidextrous slide stop Reversible magazine release button Front and rear serrations for reloading Accessory rail under the frame Three automatic safeties Technical specifications Caliber: 9×19 Standard magazine capacity: 19 rounds Maximum capacity: 19+1 rounds Capacity with extended magazine: 21+1 rounds Operating principle: short recoil system Trigger: SFDA, pre-cocked striker mechanism Trigger pull weight: 25 ± 4 N Trigger travel: 9 ± 1 mm Trigger reset travel: 4 mm Frame material: polymer, reinforced with fiberglass Slide material: steel Barrel length: 134 mm Barrel manufacturing type: cold hammer-forged Muzzle thread: 1/2″×28 UNEF–3A Protective cap: yes Optics interface: CZ P-10 OR adapter plate system Sights: raised iron sights with luminescent dots Overall length: 225 mm Width: 32 mm Height: 153 mm Weight with empty magazine: 830 g Slide stop: ambidextrous Magazine release button: reversible Backstraps: interchangeable S, M, and L Accessory rail: on the front of the frame Automatic safety: striker block Trigger safety: trigger tab Additional safety: trigger lever safety mechanism External manual safety: none Color: black Included in the package CZ P-10 F OR SR pistol 2 × 19-round magazines Interchangeable backstraps in sizes S, M, and L Protective cap for the barrel thread Protective plate for the optics interface Factory case User manual The red dot sight, corresponding adapter plate, and suppressor are not included in the standard package. The exact contents and number of magazines may vary depending on the delivery batch. Frequently Asked Questions What do the designations OR and SR mean? OR stands for “Optics Ready,” meaning the slide is prepared for mounting a red dot sight. SR stands for “Suppressor Ready,” meaning an extended and threaded barrel suitable for mounting a compatible muzzle device. Is a red dot sight included? No. The red dot sight must be purchased separately. To install it, you need an adapter plate compatible with the CZ P-10 OR system and the mounting standard of your chosen sight. Which red dot sights are compatible with this pistol? Compatibility depends on the adapter plate used. CZ offers plates for various popular mounting standards, including sights from Trijicon, Vortex, Meopta, and Leupold. Before purchasing, compare the footprint of your sight and the description of the adapter plate. Can iron sights be used together with a red dot sight? The pistol is equipped with raised sights with luminescent dots. Their visibility through the red dot sight depends on the chosen adapter plate, the sight’s housing height, and the specific setup. Is a suppressor included? No. The pistol has a 1/2″×28 UNEF–3A thread, but a suppressor or other muzzle device must be purchased separately. Before installation, check the device’s caliber, thread, and any permit or registration requirements. Can the pistol be used without a muzzle device? Yes. If no suppressor or other muzzle device is installed, the thread must be covered with the included protective cap. This helps prevent thread damage and dirt accumulation. Does the pistol have a manual safety? No. This model does not have an external manual safety. The safety system includes a trigger tab, trigger lever safety mechanism, and automatic striker block. What does 19+1 capacity mean? The standard magazine holds 19 rounds, and “+1” means an additional round in the chamber. With the extended magazine, according to the manufacturer, capacity can be increased to 21 rounds. How does the OR SR differ from the standard CZ P-10 F OR model? The P-10 F OR is prepared for optics installation, but its standard barrel is not threaded. The OR SR adds an extended 134 mm barrel, 1/2″×28 thread, protective cap, and raised iron sights. When is the CZ P-10 F OR SR the right choice? This model suits the shooter who wants both the option to install a red dot sight and a threaded barrel in one full-size pistol. The longer grip and 19-round magazine are great for range training and dynamic drills, and the 830-gram weight makes the pistol lighter than sport models with a steel frame. If you don’t need a threaded barrel, the standard P-10 F OR is a simpler and more compact choice. The P-10 C OR SR is better for those who want the same optics-and-thread combination in a shorter format. The heavier Shadow 2 OR with a steel frame is optimal for pure competition use. Expert recommendation When choosing a red dot sight, first check the mounting footprint, then select the appropriate CZ P-10 OR adapter plate. According to CZ instructions, adapter plate screws should be tightened to 1.3 N·m, and the manufacturer recommends using an appropriate thread locker. Install the red dot sight as per its manufacturer’s instructions. Using both optics and a suppressor at the same time changes the slide’s operating conditions and places higher demands on ammunition and maintenance. In such configuration, follow CZ’s instructions and the muzzle device manufacturer’s recommendations. If no muzzle device is used, always keep the protective cap in place and regularly check the optics plate screws and barrel thread condition. Full-size pistol with optics mounting capability and threaded barrel The CZ P-10 F OR SR combines a 19-round magazine, full-size polymer frame, optics-ready slide, and a 1/2″×28 threaded barrel. This is a practical choice for shooters who want one pistol with convenience, an adjustable grip, and the ability to use various sight and muzzle device configurations. Attention! The weapon configuration may differ; please check details at Jahipaun stores.
CZ P-10 F OR SR is a full-size pistol with a polymer frame, featuring a slide prepared for mounting a red dot sight and an extended barrel equipped with a 1/2″×28 UNEF–3A thread. The pre-cocked striker mechanism, 19-round magazine, raised sights with luminescent dots, and a weight of 830 grams make it a versatile choice for the shooting range and sport shooting. Suitable for use For regular training at the shooting range For dynamic sport shooting For shooting with a red dot sight For users who prefer a full-size service pistol For shooters who require a threaded barrel For those who prefer increased magazine capacity For users with different hand sizes For both right- and left-handed shooters Why choose the CZ P-10 F OR SR? Factory interface for mounting a red dot sight CZ OR mounting system with interchangeable adapter plates Extended 134 mm cold hammer-forged barrel Threaded muzzle 1/2″×28 UNEF–3A Protective cap for the muzzle thread Raised iron sights with luminescent dots Smooth pre-cocked striker mechanism Trigger pull weight 25 ± 4 N Short trigger reset travel — 4 mm Standard 19-round magazine Option to increase capacity to 21 rounds with an extended magazine Lightweight and durable polymer frame reinforced with fiberglass Interchangeable backstraps in sizes S, M, and L Ambidextrous slide stop Reversible magazine release button Front and rear serrations for reloading Accessory rail under the frame Three automatic safeties Technical specifications Caliber: 9×19 Standard magazine capacity: 19 rounds Maximum capacity: 19+1 rounds Capacity with extended magazine: 21+1 rounds Operating principle: short recoil system Trigger: SFDA, pre-cocked striker mechanism Trigger pull weight: 25 ± 4 N Trigger travel: 9 ± 1 mm Trigger reset travel: 4 mm Frame material: polymer, reinforced with fiberglass Slide material: steel Barrel length: 134 mm Barrel manufacturing type: cold hammer-forged Muzzle thread: 1/2″×28 UNEF–3A Protective cap: yes Optics interface: CZ P-10 OR adapter plate system Sights: raised iron sights with luminescent dots Overall length: 225 mm Width: 32 mm Height: 153 mm Weight with empty magazine: 830 g Slide stop: ambidextrous Magazine release button: reversible Backstraps: interchangeable S, M, and L Accessory rail: on the front of the frame Automatic safety: striker block Trigger safety: trigger tab Additional safety: trigger lever safety mechanism External manual safety: none Color: black Included in the package CZ P-10 F OR SR pistol 2 × 19-round magazines Interchangeable backstraps in sizes S, M, and L Protective cap for the barrel thread Protective plate for the optics interface Factory case User manual The red dot sight, corresponding adapter plate, and suppressor are not included in the standard package. The exact contents and number of magazines may vary depending on the delivery batch. Frequently Asked Questions What do the designations OR and SR mean? OR stands for “Optics Ready,” meaning the slide is prepared for mounting a red dot sight. SR stands for “Suppressor Ready,” meaning an extended and threaded barrel suitable for mounting a compatible muzzle device. Is a red dot sight included? No. The red dot sight must be purchased separately. To install it, you need an adapter plate compatible with the CZ P-10 OR system and the mounting standard of your chosen sight. Which red dot sights are compatible with this pistol? Compatibility depends on the adapter plate used. CZ offers plates for various popular mounting standards, including sights from Trijicon, Vortex, Meopta, and Leupold. Before purchasing, compare the footprint of your sight and the description of the adapter plate. Can iron sights be used together with a red dot sight? The pistol is equipped with raised sights with luminescent dots. Their visibility through the red dot sight depends on the chosen adapter plate, the sight’s housing height, and the specific setup. Is a suppressor included? No. The pistol has a 1/2″×28 UNEF–3A thread, but a suppressor or other muzzle device must be purchased separately. Before installation, check the device’s caliber, thread, and any permit or registration requirements. Can the pistol be used without a muzzle device? Yes. If no suppressor or other muzzle device is installed, the thread must be covered with the included protective cap. This helps prevent thread damage and dirt accumulation. Does the pistol have a manual safety? No. This model does not have an external manual safety. The safety system includes a trigger tab, trigger lever safety mechanism, and automatic striker block. What does 19+1 capacity mean? The standard magazine holds 19 rounds, and “+1” means an additional round in the chamber. With the extended magazine, according to the manufacturer, capacity can be increased to 21 rounds. How does the OR SR differ from the standard CZ P-10 F OR model? The P-10 F OR is prepared for optics installation, but its standard barrel is not threaded. The OR SR adds an extended 134 mm barrel, 1/2″×28 thread, protective cap, and raised iron sights. When is the CZ P-10 F OR SR the right choice? This model suits the shooter who wants both the option to install a red dot sight and a threaded barrel in one full-size pistol. The longer grip and 19-round magazine are great for range training and dynamic drills, and the 830-gram weight makes the pistol lighter than sport models with a steel frame. If you don’t need a threaded barrel, the standard P-10 F OR is a simpler and more compact choice. The P-10 C OR SR is better for those who want the same optics-and-thread combination in a shorter format. The heavier Shadow 2 OR with a steel frame is optimal for pure competition use. Expert recommendation When choosing a red dot sight, first check the mounting footprint, then select the appropriate CZ P-10 OR adapter plate. According to CZ instructions, adapter plate screws should be tightened to 1.3 N·m, and the manufacturer recommends using an appropriate thread locker. Install the red dot sight as per its manufacturer’s instructions. Using both optics and a suppressor at the same time changes the slide’s operating conditions and places higher demands on ammunition and maintenance. In such configuration, follow CZ’s instructions and the muzzle device manufacturer’s recommendations. If no muzzle device is used, always keep the protective cap in place and regularly check the optics plate screws and barrel thread condition. Full-size pistol with optics mounting capability and threaded barrel The CZ P-10 F OR SR combines a 19-round magazine, full-size polymer frame, optics-ready slide, and a 1/2″×28 threaded barrel. This is a practical choice for shooters who want one pistol with convenience, an adjustable grip, and the ability to use various sight and muzzle device configurations. Attention! The weapon configuration may differ; please check details at Jahipaun stores.
