The CZ P-10 C OR SR is a polymer-framed pistol with a compact grip, a factory optics-ready slide and an extended barrel threaded 1/2″×28 UNEF–3A.
The CZ P-10 C OR SR is a polymer-framed pistol with a compact grip, a factory optics-ready slide and an extended barrel threaded 1/2″×28 UNEF–3A. It combines a 15-round magazine, partially pre-cocked striker system, raised sights and interchangeable backstraps. According to CZ’s current specifications, the pistol weighs 760 g with an empty magazine. Suitable for use Regular range training Dynamic practical shooting Shooting with a red-dot sight Users requiring a threaded barrel Shooters who prefer a compact grip Users seeking a smaller frame than the full-size P-10 F Different hand sizes Right- and left-handed shooters Why choose the CZ P-10 C OR SR? Factory optics-ready slide CZ OR interchangeable adapter-plate system Extended 122 mm cold-hammer-forged barrel 1/2″×28 UNEF–3A muzzle thread Factory thread protector Raised mechanical sights with luminescent markings Consistent partially pre-cocked striker system Trigger pull of 25 ± 4 N Short 4 mm trigger reset Standard 15-round magazine Capacity can be increased to 17 rounds with an extended magazine base Lightweight fibreglass-reinforced polymer frame Interchangeable S, M and L backstraps Ambidextrous slide stop Reversible magazine-release button Front and rear slide serrations Frame-mounted accessory rail Three automatic safety systems Technical specifications Calibre: 9×19 Standard magazine capacity: 15 rounds Maximum standard capacity: 15+1 rounds Capacity with extended magazine base: 17+1 rounds Operating system: Short-recoil, locked breech Trigger: SFDA, partially pre-cocked striker system Trigger pull: 25 ± 4 N Trigger travel: 9 ± 1 mm Trigger reset: 4 mm Frame material: Fibreglass-reinforced polymer Slide material: Steel Barrel length: 122 mm Barrel construction: Cold hammer forged Muzzle thread: 1/2″×28 UNEF–3A Thread protector: Yes Optic interface: CZ P-10 OR adapter-plate system Sights: Raised mechanical sights with luminescent markings Overall length: 209 mm Width: 32 mm Height: 135 mm Weight with empty magazine: 760 g Slide stop: Ambidextrous Magazine release: Reversible Backstraps: Interchangeable S, M and L sizes Accessory rail: Located at the front of the frame Automatic safety: Firing-pin block Trigger safety: Integrated trigger safety Additional safety: Trigger-bar safety External manual safety: None Colour: Black Supplied with CZ P-10 C OR SR pistol 2 × 15-round magazines S, M and L backstraps Barrel-thread protector Optic-interface cover plate Factory case Instruction manual The red-dot sight, matching optic plate and suppressor are not included in the standard package. Exact package contents and magazine quantity may vary between deliveries. Frequently asked questions What do OR and SR mean? OR stands for “Optics Ready”, indicating a slide prepared for a red-dot sight. SR means “Suppressor Ready” and identifies the extended, threaded barrel intended for a compatible muzzle device. Is a red-dot sight included? No. The optic must be purchased separately. Installation requires a CZ P-10 OR adapter plate corresponding to the mounting footprint of the selected sight. Which red-dot sights are compatible? Compatibility depends on the adapter plate. CZ offers plates for several popular mounting standards used by optics from manufacturers including Trijicon, Vortex, Meopta and Leupold. The optic footprint and adapter-plate specification should be compared before purchase. Can the mechanical sights be used with a red dot? The pistol has raised mechanical sights with luminescent markings. Whether they remain visible through the optic depends on the adapter plate, optic-body height and complete mounting configuration. Is a suppressor included? No. The pistol has a 1/2″×28 UNEF–3A thread, but the suppressor or other muzzle device must be selected separately. Its calibre, thread specification and applicable legal requirements must be confirmed before use. Can the pistol be used without a muzzle device? Yes. When no suppressor or other muzzle device is installed, the barrel thread should remain covered by the supplied thread protector to help prevent damage and contamination. Does the pistol have a manual safety? No. It has no external manual safety. Its safety system consists of an integrated trigger safety, trigger-bar safety and automatic firing-pin block. What does the 15+1 capacity mean? The standard magazine holds 15 cartridges, while “+1” refers to an additional cartridge in the chamber. According to CZ, an extended magazine base can increase magazine capacity to 17 rounds. How does the P-10 C OR SR differ from the full-size P-10 F OR SR? The P-10 C OR SR has a shorter grip, a standard 15-round magazine and a lower 135 mm height. The full-size P-10 F OR SR uses a 19-round magazine, 134 mm barrel and larger frame. According to CZ’s current figures, the compact model is 70 g lighter. When is the CZ P-10 C OR SR the right choice? This model is suitable for users who want a shorter grip and lower overall height than the P-10 F while retaining both red-dot compatibility and a threaded barrel. Its 15-round magazine provides useful capacity for a compact frame, and the interchangeable backstraps allow the grip to be adapted to the shooter. The P-10 C OR is the simpler choice when a threaded barrel is unnecessary. The P-10 F OR SR provides a longer grip, higher magazine capacity and slightly longer barrel. A heavier steel-framed model may be more appropriate when competition use and maximum stability are the main priorities. Expert recommendation Select the red-dot sight and adapter plate as one compatible system. The optic footprint, plate design and screw length must match precisely. The CZ manual specifies an adapter-plate screw torque of 1.3 N·m and recommends a suitable thread-locking compound. Install the optic itself according to its manufacturer’s instructions. When an optic and suppressor are used simultaneously, CZ recommends a compact suppressor for this model and a red-dot sight weighing no more than 35 g. This configuration places greater demands on firearm operation and maintenance, so the current CZ manual and muzzle-device manufacturer’s instructions must be followed. Keep the thread protector installed whenever no muzzle device is fitted. A compact P-10 with optics and threaded-barrel readiness The CZ P-10 C OR SR combines a compact grip, 15-round magazine, optics-ready slide and 1/2″×28 threaded barrel. It is a versatile option for shooters who want an adaptable polymer-framed pistol with flexibility for different sight and muzzle-device configurations. Attention! The modification of the weapon may vary, ask the Jahipauna stores for more information.
The CZ P-10 C OR SR is a polymer-framed pistol with a compact grip, a factory optics-ready slide and an extended barrel threaded 1/2″×28 UNEF–3A. It combines a 15-round magazine, partially pre-cocked striker system, raised sights and interchangeable backstraps. According to CZ’s current specifications, the pistol weighs 760 g with an empty magazine. Suitable for use Regular range training Dynamic practical shooting Shooting with a red-dot sight Users requiring a threaded barrel Shooters who prefer a compact grip Users seeking a smaller frame than the full-size P-10 F Different hand sizes Right- and left-handed shooters Why choose the CZ P-10 C OR SR? Factory optics-ready slide CZ OR interchangeable adapter-plate system Extended 122 mm cold-hammer-forged barrel 1/2″×28 UNEF–3A muzzle thread Factory thread protector Raised mechanical sights with luminescent markings Consistent partially pre-cocked striker system Trigger pull of 25 ± 4 N Short 4 mm trigger reset Standard 15-round magazine Capacity can be increased to 17 rounds with an extended magazine base Lightweight fibreglass-reinforced polymer frame Interchangeable S, M and L backstraps Ambidextrous slide stop Reversible magazine-release button Front and rear slide serrations Frame-mounted accessory rail Three automatic safety systems Technical specifications Calibre: 9×19 Standard magazine capacity: 15 rounds Maximum standard capacity: 15+1 rounds Capacity with extended magazine base: 17+1 rounds Operating system: Short-recoil, locked breech Trigger: SFDA, partially pre-cocked striker system Trigger pull: 25 ± 4 N Trigger travel: 9 ± 1 mm Trigger reset: 4 mm Frame material: Fibreglass-reinforced polymer Slide material: Steel Barrel length: 122 mm Barrel construction: Cold hammer forged Muzzle thread: 1/2″×28 UNEF–3A Thread protector: Yes Optic interface: CZ P-10 OR adapter-plate system Sights: Raised mechanical sights with luminescent markings Overall length: 209 mm Width: 32 mm Height: 135 mm Weight with empty magazine: 760 g Slide stop: Ambidextrous Magazine release: Reversible Backstraps: Interchangeable S, M and L sizes Accessory rail: Located at the front of the frame Automatic safety: Firing-pin block Trigger safety: Integrated trigger safety Additional safety: Trigger-bar safety External manual safety: None Colour: Black Supplied with CZ P-10 C OR SR pistol 2 × 15-round magazines S, M and L backstraps Barrel-thread protector Optic-interface cover plate Factory case Instruction manual The red-dot sight, matching optic plate and suppressor are not included in the standard package. Exact package contents and magazine quantity may vary between deliveries. Frequently asked questions What do OR and SR mean? OR stands for “Optics Ready”, indicating a slide prepared for a red-dot sight. SR means “Suppressor Ready” and identifies the extended, threaded barrel intended for a compatible muzzle device. Is a red-dot sight included? No. The optic must be purchased separately. Installation requires a CZ P-10 OR adapter plate corresponding to the mounting footprint of the selected sight. Which red-dot sights are compatible? Compatibility depends on the adapter plate. CZ offers plates for several popular mounting standards used by optics from manufacturers including Trijicon, Vortex, Meopta and Leupold. The optic footprint and adapter-plate specification should be compared before purchase. Can the mechanical sights be used with a red dot? The pistol has raised mechanical sights with luminescent markings. Whether they remain visible through the optic depends on the adapter plate, optic-body height and complete mounting configuration. Is a suppressor included? No. The pistol has a 1/2″×28 UNEF–3A thread, but the suppressor or other muzzle device must be selected separately. Its calibre, thread specification and applicable legal requirements must be confirmed before use. Can the pistol be used without a muzzle device? Yes. When no suppressor or other muzzle device is installed, the barrel thread should remain covered by the supplied thread protector to help prevent damage and contamination. Does the pistol have a manual safety? No. It has no external manual safety. Its safety system consists of an integrated trigger safety, trigger-bar safety and automatic firing-pin block. What does the 15+1 capacity mean? The standard magazine holds 15 cartridges, while “+1” refers to an additional cartridge in the chamber. According to CZ, an extended magazine base can increase magazine capacity to 17 rounds. How does the P-10 C OR SR differ from the full-size P-10 F OR SR? The P-10 C OR SR has a shorter grip, a standard 15-round magazine and a lower 135 mm height. The full-size P-10 F OR SR uses a 19-round magazine, 134 mm barrel and larger frame. According to CZ’s current figures, the compact model is 70 g lighter. When is the CZ P-10 C OR SR the right choice? This model is suitable for users who want a shorter grip and lower overall height than the P-10 F while retaining both red-dot compatibility and a threaded barrel. Its 15-round magazine provides useful capacity for a compact frame, and the interchangeable backstraps allow the grip to be adapted to the shooter. The P-10 C OR is the simpler choice when a threaded barrel is unnecessary. The P-10 F OR SR provides a longer grip, higher magazine capacity and slightly longer barrel. A heavier steel-framed model may be more appropriate when competition use and maximum stability are the main priorities. Expert recommendation Select the red-dot sight and adapter plate as one compatible system. The optic footprint, plate design and screw length must match precisely. The CZ manual specifies an adapter-plate screw torque of 1.3 N·m and recommends a suitable thread-locking compound. Install the optic itself according to its manufacturer’s instructions. When an optic and suppressor are used simultaneously, CZ recommends a compact suppressor for this model and a red-dot sight weighing no more than 35 g. This configuration places greater demands on firearm operation and maintenance, so the current CZ manual and muzzle-device manufacturer’s instructions must be followed. Keep the thread protector installed whenever no muzzle device is fitted. A compact P-10 with optics and threaded-barrel readiness The CZ P-10 C OR SR combines a compact grip, 15-round magazine, optics-ready slide and 1/2″×28 threaded barrel. It is a versatile option for shooters who want an adaptable polymer-framed pistol with flexibility for different sight and muzzle-device configurations. Attention! The modification of the weapon may vary, ask the Jahipauna stores for more information.
